Skip to content
The UP-200/UG12 handpiece uses this tiny spacer internally to keep spinning parts, bearings, and housings properly spaced and clean.

UP200 Metal Spacer KS-034

by Ovation Spas
$4.00 - $4.00
$4.00
$4.00 - $4.00
$4.00

This small spacer is used internally in the UP‑200 / UG12 handpiece to maintain correct spacing/clearance between rotating parts, bearings or housings to ensure smooth, stable high‑RPM operation.

Features

  • Maintains precise internal spacing and alignment in the handpiece’s high‑speed assembly, which contributes to reduced vibration and bit wobble.

  • Helps protect bearings and other internal components by ensuring correct clearances and reducing unintended movement.

  • Relatively inexpensive maintenance part that can contribute to restoring performance without larger component replacements.

  • OEM specification ensures correct fit and tolerance, important for precision tools like the UP‑200 / UG12.

  • Dimensions: ID ~ 2.9 mm · OD ~ 7.5 mm · Thickness ~ 0.2 mm. 

  • Material: Copper, intended for high‑speed applications.

Installation Tips

  • Confirm your handpiece’s parts list shows KS‑034 for this spacer location.

  • Inspect the old spacer and surrounding seating/housing for wear, deformation or damage — a new spacer alone may not fix issues if the seating surfaces or adjacent components are compromised.

  1. Disconnect and power off the handpiece; ensure it is fully stopped.

  2. Disassemble the relevant front/spindle or internal housing area to access the spacer location.

  3. Remove the old spacer, clean the area of debris, lubricant residue or metal shavings.

  4. Insert the new KS‑034 spacer, ensuring it lies flat, fully seated and not damaged or bent.

  5. Re‑assemble the handpiece and perform a no‑load test (without bit) at low speed to verify smooth operation and minimal vibration before full use.