KUPA PARTS

This motor cord with plug (part # KE-210) is the OEM replacement cable designed for use with the KUPA UP-200 / UG12 handpiece series. It connects t...

These screws are typically used in securing outer housing parts (e.g., rear caps, front nose cover) or other structural sections of the handpiece w...

This motor cap is an OEM replacement component for the front/rear housing of the motor section in the KUPA UP-200 / UG12 high-speed handpiece. It s...

The KE564A is a genuine replacement terminal/contact part used in the KUPA UP-200 / UG12 handpiece series. This terminal serves as an electrical co...

This is an OEM replacement terminal contact for the KUPA UP‑200 / UG12 handpiece series — part number KE563A. Terminals like this are used inside t...

This OEM rear lid (part number UG10‑401A) is the replacement back cover for the KUPA UP‑200 / UG12 high‑speed handpiece. This component encloses th...

This is an OEM screw (part number PM2X3) designed for the UP‑200 / UG12 handpiece series. These screws are used in the internal or external assembl...

This is an OEM replacement set of carbon motor brushes (part number PKE‑560, often listed as PKE‑560A) for the KUPA UP‑200 / UG12 series handpieces...

This O‑ring is an OEM replacement seal designed for the KUPA UP‑200 / UG12 handpiece. It functions as a sealing ring to prevent dust, debris or lub...

This seal plate (part number HESE‑205) is an OEM replacement component for the KUPA UP‑200 / UG12 nail‑drill handpiece. It is engineered for high‑s...

This is the OEM‑replacement stainless steel deep‐groove ball bearing specified for the KUPA UP‑200 / UG12 nail‑drill handpieces.  Features Smooth...

This small spacer is used internally in the UP‑200 / UG12 handpiece to maintain correct spacing/clearance between rotating parts, bearings or housi...

This is an OEM-specified PTFE (Teflon) washer/spacer designed for high-speed internal use in the KUPA UP-200 / UG12 handpiece line. It serves as a ...

This spacer is an OEM replacement component specified for the KUPA UP-200 / UG12 handpiece series. It functions as a thin shim/spacer inside the ha...

This metal Phillips-head screw (part number SFM2X4) designed for use in the KUPA UP-200 / UG12 handpiece series. These screws are used to secure in...

This set ring (part # UG10-209) is an OEM replacement part for the KUPA UP-200 / UG12 series handpieces. According to the parts listing, it is made...

The KS-144A is a precision-made metal spacer (shim) designed for the KUPA UP-200 / UG12 high-speed handpiece internal assembly. This spacer helps e...

The 5130-43 clip ring is a precision retaining ring specified for KUPA’s UP-200 / UG12 handpiece series. It functions as a small but critical compo...

The UG10-116 collar is an OEM replacement component designed for the KUPA UP-200 / UG12 series handpiece. It’s a precision-machined collar that hel...

The GAS-106 is a precision-molded Delrin (acetal plastic) joint used in the UP-200 / UG12 series handpieces from KUPA. This joint provides a low-fr...

This is the OEM‑specified “Chuck Join” component for KUPA’s UP‑200 / UG12 professional nail‑drill handpieces, part number UG10‑104A, labelled Versi...

The KB-070 coil spring is an OEM replacement part specified for the KUPA UP-200 / UG12 high-speed handpiece. It is used to apply controlled tension...

This is the OEM replacement chuck case (front-nose housing for the collet/chuck assembly) for the KUPA UP-200 / UG12 high-speed nail-drill handpiec...

The KC-081S is a precision copper clip ring designed for the UP-200 / UG-12 high-speed handpieces. This ring functions as a retention component, se...

The KS-062 copper spacer is an OEM replacement component specified for the KUPA UP-200 / UG12 handpiece series. It’s a precision-machined copper sh...

The KW-081 is an OEM-quality wave-profile washer (also called a “wave spring washer”) designed for high-speed handpieces such as the UP-200 & U...

The KS-088 spacer is an OEM-grade stainless steel shim/spacer designed for high-speed nail-drill handpieces in the KUPA UP-200 & UG12 families....

The UG10-108 dust seal is an OEM‐replacement part for KUPA’s UP-200 / UG12 high‐speed handpieces. It functions as the front‐end protective seal, pr...

The UG10-109 dust seal is an OEM replacement component designed for the KUPA UP-200 / UG12 handpiece. This aluminum dust seal is installed in the f...

The KC-062S is a precision-machined retaining ring (clip ring) used inside the UP-200 / UG12 handpiece front assembly. This ring secures internal c...

This wave washer (#KW-100A) is an OEM spare part from KUPA intended for the UP-200 / UG12 series handpieces. It’s a thin, corrugated (wave-profile)...

This precision metal washer (part #KS-108) is an OEM replacement component designed for KUPA handpiece models including the UP-200 / UG12 series. I...

This part is a stainless-steel high-speed ball bearing specified for the KUPA UP-200/UG12 handpiece (and related high-RPM models). It is listed as ...

This cam component (part number 536K06) is an OEM-specified part for the KUPA KP-60 / KP-60A (and possibly compatible KP-series) handpieces. It ser...

This spindle (#KP-6024) is an OEM-specified replacement component from KUPA for the KP-60A nail-drill handpiece. It serves as a key rotating shaft ...

This red O-ring, part number OR007001003-1, is an OEM replacement seal for the KUPA KP-60A handpieces. It is designed to fit a specific groove with...

The KP-6025 washer is an OEM replacement part for the KP-60A handpiece line from KUPA. It is a thin metal washer (brass/copper alloy) that fits in ...

This spacer is an OEM-grade replacement component for the KP-60 / KP-60A handpiece. It is designed to maintain precise internal spacing and alignme...

The KP6002 is an OEM-grade replacement front housing (also called “front nose shell”) designed for the KUPA Manipro KP-60A nail-drill handpiece. Th...

This replacement housing (part #536K01) is an OEM-specified body shell for the KUPA KP-60 handpiece. It forms the main structural exterior of the h...

This O-ring (Part # OR00200100-1) is a genuine replacement seal specified for use in the KUPA KP-55A/KP-60 handpiece. It is designed to restore pro...

This high-precision replacement knob is specifically designed for the KUPA KP-60 handpiece. It provides the user with smooth and reliable control o...

This felt oiler, part number 536K12, is a genuine replacement accessory for the KUPA KP-60 handpiece. The oiler is a small felt washer placed withi...

This high-quality motor/power cord is designed for the KUPA KP-60 handpiece. It provides the necessary connection between the handpiece body and th...

This steel spindle is an OEM replacement part for the KUPA KP-60 series handpieces. It forms a critical rotating component inside the handpiece ass...

The #536K07 drive shaft is a precision-machined steel component designed for use in KUPA KP-series handpieces (specifically the KP-60 model). It su...

The spring is a precision replacement coil designed for the KUPA KP-60 536K08 (and compatible KP-series) handpieces. It provides essential preload,...

The #536K02 Front Housing is an OEM-grade replacement component manufactured by KUPA, designed specifically for their KP-60 series handpieces (e.g....