Skip to content
KUPA UP-200/UG12 handpiece bearing. High-speed rated stainless steel ball bearing, minimizes vibration and restores smooth rotation in professional nail drill handpieces

UP-200 Bearing 1480ZZ

by Ovation Spas
$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00

This part is a stainless-steel high-speed ball bearing specified for the KUPA UP-200/UG12 handpiece (and related high-RPM models). It is listed as Bearing #1480ZZ in catalogues. The bearing supports the rotor/spindle assembly, enabling smooth, low-vibration rotation at high RPMs.

Features

  • Dimensions: Outside diameter = 14 mm, Inside diameter = 8 mm, Width = 4 mm 

  • Material: Stainless steel, shielded (“ZZ” indicates double metal shields) for high speed use.

  • Compatibility: Recommended for UP-200 / UG12 handpieces, often listed as “Pair of KUPA UP200 Ball Bearings - 1060ZZ and 1480ZZ” in accessory kits.

Installation Tips

  • Confirm the existing bearing’s dimensions (14 × 8 × 4 mm) and that the seat/housing is clean and undamaged.

  • Inspect the spindle/shaft, housing and adjacent bearings for wear—bearings rarely wear alone.

  1. Unplug the handpiece and allow it to stop fully.

  2. Disassemble the handpiece to access the bearing area (rotor/spindle).

  3. Remove the old bearing carefully, clean the seating surface.

  4. Insert the new 1480ZZ bearing, ensure it seats properly, no debris or misalignment.

  5. Re-assemble the handpiece and run it unloaded (no bit) to check for smooth operation, no abnormal noise or vibration.